1. The material part:
This series of machines used in the main material is coal, coke, slag, iron skin, gray dust, sludge, etc. A certain proportion of the bulk, and forming the larger diameter roller would have a larger bite angle, the greater the pressure, so to ensure that material evenly into the two-series between the quantitative feeding is important, the general There are three methods: a belt feeder for feeding, due to the economical and practical way of feeding has become the first choice for many factories.
2. Transmission parts:
This series of machines for the main drive system: motor-v-shaped belt - cylindrical gear reducer - to open a roller-style gear.
3. Forming part:
Forging into the density, structure compact, good wear resistance, long life, the ball groove of a good process, more suitable type of material, and reliable operation, mostly used in large-scale high-pressure molding machine, but the high cost. Manufacturing process improvements, replacement of maintenance equipment is now more convenient to reduce the difficulty of user maintenance.
4. Hydraulic parts:
Play the entire hydraulic system to ensure that the function of forming pressure, the system easy maintenance and reliable operation, hydraulic cylinder factory structure is based on years of experience in production machine many times the ball pressure test of the structure under the election. 5.oblique body iron pressure: This section mainly for non-hydraulic machine of the constant pressure on the ball, has obtained national patent, the body is very simple, but the role of large, very solid stability of the overall steel are particularly good, easy adjustment, no wear and tear, is to adjust its structure Rail oblique compression screw down the backlog, another piece of iron to the floating ramp with a fixed pressure roller thrust, so that the normal long-term work pressure rolling. The disadvantage is that with this body, pressure must be added two coal iron absorption, to remove iron materials. Repression can be to install sieve powder metallurgy, iron to prevent damage to equipment.

Ⅱ. General introduction about the Mixer
This mixer is dedicated to mixing charcoal power
Technical parameters:

Description of the machine

The machine is suitable for such companies to use for example: casting, refractory etc.