meat marinating machine

Automatic fish deboner machine , fresh fish meat separator is mainly used in fish meat collect and pick up. This machine can separate fish meat from fish bone, fish skin, fish tendon in order to raise the fish use rate and save manpower. it can debone small whole fish or half bigger fish or fish leftover.

Frozen Meat grinders are essential equipment for meat processing. Strong power, wide application range, high production efficiency, stainless steel,bright and smooth, easy to clean.The frozen meat grinder has a variety of models depending on the production capacity. The meat grinder has different orifice plates, and the thickness of the minced meat is different.

The vacuum meat tumbler is to put the processed meat and fish into vacuum barrel to knead, massage, and roll. It can improve the speed for meat to absorb salt and seasoning, and keep the meat moisture maximum.This machine can be set freely tumbling working hours, intermittent tumbling, the vacuum tumbling time, to achieve truly continuous tumbling, intermittent tumbling arbitrarily set.

Chicken feet processing line: lifting(conveyor with climbing slope)-scalding(Spiral scalder)-Peeling(chicken feet peeler)-cooling(screw chiller)-Dewatering(dripping drum)-chicken feet cutting machine-Quick Freezer.
All of Chicken feet processing machine are made of stainless steel, which make the chicken feet hygiene.
Chicken feet processing machine could be with the capacity from 200kg/h to 2t/h.
Chicken feet processing machine can be customized according to the customers’ requirements.

The fresh meat slicer can cut pieces of meat of different thickness requirements,and can process sliced products such as tenderloin slices, snow flakes, and boneless chicken.the fresh meat slicing machine can be cut with a slitter for cutting chicken and chicken shreds

pork peeling machine is used to shovel pork skin.pig skin machine is easy to peel,pigskin thickness can be adjusted.

Meatball Maker Machine Electric Meat Ball Machine High Speed Automatic Fishball Meat Ball Machine can be adjusted by changing mould, it can make 1.6cm, 1.8cm, 2.2cm, 2.6cm, 3.0cm and other size meatballs according to clients needs.The meatball forming machine ,Such as chicken ball ,fish ball,beef ball ,meatball as so on .which is the equipment for all kinds of meat forming into balls, can produce meatball and pignut ball of different specifies.

The machine is our new design for cutting squid into rings and strip.Machine is made of full stainless steel.It’s easy to operate.Just press the buttons to control the machine working.
This machine is a necessary equipment for squid deeply processing.No damage for squid,high efficiency.
The blade is heat treated to cut the squid ring smoothly.You just need to put the squid on the belt and it can cut the squid into ring automatically.Suitable for those squid processing industry,seafood processing factory,snakes manufacturer,etc.

This machine is horizontal slicer machine, used fresh boneless meat slice, like chicken, pork, fish, liver, squid etc.The cutting size is decided by the knife set. One machine could be equipped with more than one size.If you need more knives, you can communicate with the salesman, and you can add them separately.

Natural flat-cutting 2-roll frozen meat machine, flat-cut 1-roll frozen meat machine, using a single angle of view cutting, touch screen operation, PLC, servo motor drive, horizontal wire feeding, judging cutting height up to 20 cm, dual control operation.
The height of the frozen meat is adjustable, the machine is convenient to move and can be operated flexibly.

The quail egg shelling machine drives the gear through the rotation of the motor, and the mechanically drives the sponge pad up and down and the hose to rotate, generating friction to tear the shell of the quail egg from the surface to achieve the effect of shelling.

The meat chicken cutting machine is suitable for middle and small animal bones, ribs, frozen meat, frozen chicken, frozen fish and other processing equipment.
Widely used in big, small and medium-sized food processing plants, slaughterhouses, meat processing factory, supermarket, etc.

The meat bowl cutter utilizes the cutting action of the high-speed rotation of the guillotine knife to finely chop the meat, minced meat, fat and other main raw materials into meat filling or meat mud. At the same time, other raw materials such as water, borneol and auxiliary materials are stirred together into a uniform milky shape. Things. Can also be used for fish, fruit, vegetables, nuts, crushing and mixing. The high-speed rotation of the file can shorten the running time, reduce the heat of the material, maintain the color, elasticity, product yield and shelf life of the filling.

Stuffing machine is used for mixing equipment, with high efficiency and easy operation.

This machine is made of all stainless steel materials, wear-resistant and durable, meets the standard, is simple to make, easy to clean, safe and reliable, accurate operation of opening and opening, cleans the internal organs, does not break the fish gallbladder, automatically sprays water at the same time, rinses the fish belly . Does not hurt the skin, does not hurt the fins. Guarantee the appearance of the fish, does not affect the cooking and meat taste and quality of the fish. Can be customized according to customer needs, such as head to head, tail, slice, back

Fish bone remover machine is also called fish meat adopting machine, fish bone separator, bone meat separator. It can easily separate fish meat from fish bone and fish skin.

Skin roller of that machine is specially produced, so the surface of the fish is clean and the actual outcome of cutting efficiency is more than 99 %, which maximize the capability and productivity.
The blades can be adjusted front and back up and down so it can be applied to any kind of fish.
The input insert place, bottom support, upper board and others can be separated with one touch action.
1.Widely used: for processing a variety of fish, for example, squid, tilapia, catfish, cod, sole fish, red fish, snapper, etc.
2.High efficiency: a machine can be over 30-50 operation ability, recycling equipment costs in the short term.
3.High Effect: high peeling effect is better, to skin clean and tidy.
4.Out into a high: than manual peel out rate.
5.Easy to clean: equipment all adopt the stainless steel material, adopts the humanized design, easy to remove clean.

We have different capacity meat tumbler, from 50L to 3600L capacity, please choose the one suitable for you. The vacuum meat tumbler is to put the processed meat and fish into vacuum barrel to knead, massage, and roll. It can improve the speed for meat to absorb salt and seasoning, and keep the meat moisture maximum.

The meat vegetable mixing stuffing machine is suitable for all kinds of meat products, so that the animal protein between the meat fibers can be separated out, so as to ensure the meat filling is mixed evenly and the process is fluffy.

The production line of killing fish brings together the functions of scaling, stomping, visceral and body cleaning. It is suitable for aquatic product processing plant, fishery company, large food distribution center, food processing plant

Saline injection machine is to be injected into the meat fully pickled in brine and auxiliary material, to make the meat tender, soft and improve productivity.Automatic injection machine is widely used in meat processing, conditioning products processing, seafood processing, fish protein injection.

Fully automatic chicken claw peeling machine is mainly used for removing yellow skin from chicken claws. The speed reducer drives the swing disc to rotate so that the chicken claws spiral in the barrel to complete the peeling work.

Large frozen meat slicer (support customized), high efficiency and convenient operation incision neatly arranged in turn One can cut 2-8 volumes mutton or fat.
A CNC slicer can cut 2-8 mutton or fat, the machine adopts PLC control, motor drive, infrared sensing safety protection device Adjust the thickness without downtime, according to the thickness of want to automatically add and subtract in the numerical control switch, the workbench USES a special organic food made from plastic, ensure food safety, health, is a large hotpot restaurant Special equipment of large and medium-sized wholesalers for beef and mutton . This machine can cut frozen meat into thick, thin, long, straight pieces and a variety. of volume type and multi-usage.

the meat cutting dicing slicing machine can be directly cut 12 ¡ãC – 18 ¡ãC to – without the thawing of frozen meat, reduce the delay time, avoid the anamnesis of the whole piece of meat in the loss of nutrients in the process, is essential in the process of meat processing equipment.

The Automatic fish killing machine can clean the fish at one time,it is a collection to open maw, gutted and fish cleaning function, cutting fishes into two pieces, no damage to the fish and high effect. This flatten machine can process 0.25 to 5kg. Scale removal clean, not to hurt the skin, not to hurt the fins, the fish looks, does not affect the cooking results of the fish. Beside the kill fish function, if you also need the machine to cut the fish head, fish tail, slice, or open the fish back. We also can customized this machine according to your requirements.

This home fish cutting machine is applied to cut fresh fishes and semi-moist foods into cube.
Home fish cutting machine is used the left and right high-speed rotation of the circular blade to cut fish quickly and evenly.It is made of stainless steel,with high efficiency,easy for maintenance and easy to operate.

The chicken claw cutting machine uses a stainless steel chain plate to transfer materials and a chicken claw snap-fastening system, making operation easier and more comfortable. Automatic Chicken Paw Cutter / Duck Feet Cutting Machine / Chicken Claw Cutter Machine is used to cut the chicken feet. It is necessary equipment during chicken feet processing.

the marinating machine (rolling and kneading machine)vacuum breaths marinating,so that the meat stays at a regular positive pressure and expands at a regular negative pressure.the meat rubs against each other ,accelerating the rate of seasonings penetrating into the meat and greatly shortening the curing time.

It could process fresh fish or semi-thawed fish;The machine cut the small fish into three pieces, remove the middle bone and get the fish meat on both sides;Greatly save labor and save space.Fast processing, effectively maintain product freshness, improve efficiency and yield;
Suitable species: mackerel, Spanish mackerel, saury, si Iver carp,SLATE cod croaker, cod fish, yel low croaker, etc.

Fish Gutting Machine is used to gut the fish. it can unrip the fish belly and gut the fish viscera automatically. The fish viscera will be discharged through the hole.

The machine has functions of scaling the fish, gut the machine and clean the fish.

The fish viscera will be cleaned totally and will have no damage on fish guts. The machine can be equipped with the blade to separate the fish into two fillets if you need. It is widely used in fish market, hotel, restaurant, super market, fish processing factory.